We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Non-shrink mortar.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Non-shrink mortar - List of Manufacturers, Suppliers, Companies and Products

Non-shrink mortar Product List

1～12 item / All 12 items

Displayed results
High-speed rigid non-shrink mortar "Filcon S Super"

High-speed rigid non-shrink mortar "Filcon S Super"

Excellent fluidity allows for complete filling of complex shapes and voids, such as those found in chiseled concrete!

"Filcon S Super" is a high-speed hardening, non-shrink mortar. It develops strength in a matter of hours, making it suitable for urgent construction work under time constraints or while allowing traffic. Additionally, it exhibits stable long-term strength. By mixing within the specified water range, it maintains stable non-shrink properties and facilitates load transfer between structures. 【Features】 ■ Stable long-term strength ■ Maintains stable non-shrink properties ■ Excellent fluidity ■ No bleeding occurs at all ■ No worries about leaving voids after filling *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Crack-reducing fiber-reinforced non-shrink mortar 'Filcon R-F'

Crack-reducing fiber-reinforced non-shrink mortar 'Filcon R-F'

Achieves practical strength in a few days! Specially formulated non-shrink mortar with pre-mixed nylon fibers.

"Filcon R-F" is a product that maintains various performance requirements for non-shrink mortar while incorporating nylon fibers in a pre-mixed form, resulting in extremely low drying shrinkage and excellent crack resistance. Although nylon fibers are pre-mixed, it demonstrates fluidity equivalent to conventional non-shrink mortar. Additionally, its strength properties, such as compressive strength, are equal to or greater than those of conventional non-shrink mortar. 【Features】 ■ Special formulation with pre-mixed nylon fibers ■ Significantly improved crack resistance compared to conventional non-shrink mortar ■ Excellent fluidity, capable of filling complex-shaped voids thoroughly ■ No bleeding or settling, ensuring that no voids remain after filling, allowing for reliable load transfer ■ Achieves practical strength within a few days *For more details, please refer to the PDF document or feel free to contact us.

  • image_08.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-shrink mortar "Reflegrout"

Non-shrink mortar "Reflegrout"

It has good fluidity and can be pumped, making it excellent for use in large cross-sections!

"Reflegrout" is a non-shrink mortar for large cross-section repairs. It is suitable for injection into large cross-section repair work where thermal stress cracking due to cement hydration heat and drying shrinkage cracking are concerns, as well as for cross-sectional filling methods such as formwork injection methods. Compared to commonly used non-shrink mortars, it has lower hydration heat, which can reduce the thermal stress of the placed components. 【Features】 - It has good fluidity, allowing for pump delivery, etc. - Due to its low hydration heat, it can reduce the thermal stress of the placed components. - Its small drying shrinkage makes it excellent for use in large cross-sections. - It complies with the quality standards of the former Japan Highway Public Corporation's "Cross-Section Repair Material for Formwork Concrete Works." *For more details, please refer to the PDF document or feel free to contact us.

  • 2021-01-29_17h48_50.png
  • 2021-01-29_17h49_15.png
  • Repair Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Eco-friendly 'Eco Grout' that is low-carbon and considerate of the environment.

Eco-friendly 'Eco Grout' that is low-carbon and considerate of the environment.

A pre-mixed material (pre-mixed mortar) that can achieve the specified strength simply by adding water and mixing on-site.

Stable strength can be achieved regardless of the operator's skill level, contributing to quality control. Features: 1. Low carbon and environmentally friendly By incorporating fly ash from coal-fired power generation instead of Portland cement as a material, CO² emissions are reduced by 30%. 2. Formaldehyde emission grade F☆☆☆☆ This product is registered with a formaldehyde emission grade of F☆☆☆☆, making it safe for indoor use. 3. Non-bleeding and non-shrinkage By incorporating special expansion materials, it is non-bleeding and non-shrinkage, preventing voids after curing. 4. High fluidity It has excellent fluidity, allowing it to fill every corner. 5. Non-metallic aggregates Since non-metallic aggregates are used, there is no risk of rust formation. 6. Premixed type By simply mixing with the specified amount of water on-site, a stable quality non-shrink mortar can be obtained.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super Non-Shrink Mortar 'TJ Attack Sepa Mortar Z-100'

Super Non-Shrink Mortar 'TJ Attack Sepa Mortar Z-100'

Special mortar suitable for repairs of cold joint areas and construction joints! Versatile for multiple applications.

The "TJ Attack Sepamol Z-100" is a water-mixed type (premix) ultra non-shrink mortar that only requires mixing with water. It has excellent early strength, demonstrating high durability due to its high strength and high density. The hardened material is non-shrink and has high adhesion, making it superior in durability and water resistance (waterproofing). It also has high thixotropic properties (resistance to sagging) on vertical surfaces, and the workability for trowel application in V-cut areas and bean board sections (with a single application thickness of 50mm) is also good. 【Features】 ■ Premix type that only requires mixing with water ■ Excellent early strength, demonstrating high durability due to high strength and high density ■ The hardened material is non-shrink and has high adhesion, making it superior in durability and water resistance (waterproofing) ■ After curing, the shrinkage over time is minimal, and almost no cracking occurs ■ Good workability for trowel application in V-cut areas and bean board sections (with a single application thickness of 50mm) *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-speed rigid non-shrink mortar "NEW Filcon M"

High-speed rigid non-shrink mortar "NEW Filcon M"

We offer two types according to the temperature! It can reach narrow places and ensure reliable filling.

"NEW Filcon M" is a super-fast hardening, non-shrink mortar that achieves practical strength in a short time. It has excellent fluidity, allowing it to reach narrow spaces and fill them reliably. This product is a pre-mixed item with sand already blended in. By simply adding water and mixing, the specified performance can be achieved. 【Features】 ■ Achieves practical strength in a short time ■ Excellent fluidity ■ No bleeding occurs at all ■ No need to worry about leaving voids after filling ■ Two types available according to temperature *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-shrink mortar "Filcon R"

Non-shrink mortar "Filcon R"

Achieves practical strength in 1 to a few days! Capable of filling complex-shaped voids thoroughly.

"Filcon R" is a non-shrink mortar that excels in fluidity and can fill complex-shaped voids thoroughly. It steadily increases in strength even after one week of curing, achieving sufficiently high structural strength. We offer a pre-mixed type with sand already blended and a cement type without sand, allowing for a variety of formulation designs tailored to cost and construction needs. 【Features】 ■ Excellent fluidity ■ Stable strength increase after one week of curing ■ Achieves sufficiently high structural strength ■ No bleeding or settling ■ Ensures no voids are left after filling, allowing for reliable load transfer *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water and heat suppressing non-shrink mortar "Dust-proof Filcon TF"

Water and heat suppressing non-shrink mortar "Dust-proof Filcon TF"

Special dust-proof agents are used during manufacturing! In mixing and injection work with non-shrink mortar, dust dispersion can be reduced.

"Anti-Dust Filcon TF" is a special non-shrink mortar designed to improve working conditions on-site. Compared to regular non-shrink mortars, it reduces dust generation during bag disassembly and mixing by over 90%. It helps to minimize dust dispersion during mixing and injection work of non-shrink mortar in places where ventilation is difficult, such as indoors and underground. 【Features】 - Achieves dust suppression while maintaining the quality of the conventional "Filcon TF," including non-shrink and hydration heat generation suppression properties. - Uses a special dust-reducing agent during manufacturing and mixes it to achieve dust suppression. - Helps to reduce dust dispersion during mixing and injection work of non-shrink mortar in places where ventilation is difficult, such as indoors and underground. *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.png
  • image_03.png
  • image_04.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water and heat suppressing non-shrink mortar 'Low Carbon - Filcon TF'

Water and heat suppressing non-shrink mortar 'Low Carbon - Filcon TF'

Temperature stress is reduced, making it possible to suppress temperature cracking! Low-carbon cement material that reduces CO2 by 32% compared to conventional materials.

The "Low Carbon Filcon TF" is a non-shrink mortar aimed at a low-carbon society, which incorporates latent hydraulic materials with extremely low CO2 emissions during production into a portion of the raw material cement, reducing the overall CO2 emissions of the product by 32% compared to conventional materials from our company. As the focus on environmentally considerate design (CASBEE) for structures becomes more common, the ability to reduce the CO2 emissions of the filling materials, which account for a significant volume in seismic retrofitting and other applications, provides a substantial advantage when evaluating the environmental consideration of construction projects. Furthermore, by utilizing our material technology, we have succeeded in reducing CO2 emissions while maintaining almost the same physical performance as conventional products. 【Features】 ■ Suppression of temperature cracking due to hydration heat ■ Good filling ability ■ Reliable load transfer ■ Stable strength development *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.png
  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Water and heat suppressing non-shrink mortar 'Filcon TF'

Water and heat suppressing non-shrink mortar 'Filcon TF'

Excellent fluidity allows for complete filling of complex-shaped voids! The temperature rise of the components will be minimized.

"Filcon TF" is a non-shrink mortar with hydration heat suppression properties. It is suitable for pouring large member cross-sections where temperature stress cracking due to hydration heat is a concern, as well as for pouring in hot weather. Temperature stress cracking is less likely to occur when the temperature rise of the member due to hydration heat is small. By adding hydration heat suppression functionality to the mortar, it is possible to effectively suppress temperature stress cracking. [Features] - The rate of hydration heat generation is lower compared to general non-shrink mortars. - The heat dissipation efficiency significantly improves during the temperature rise of the member due to hydration heat, resulting in a smaller temperature increase of the member. - The temperature stress of the member decreases, allowing for the suppression of temperature cracking. - There is no bleeding or settlement, ensuring that no voids are left after filling and reliable load transfer can be expected. *For more details, please refer to the PDF document or feel free to contact us.*

  • image_02.png
  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • image_07.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Non-shrink mortar for pads "Filcon Pad"

Non-shrink mortar for pads "Filcon Pad"

Excellent moldability! It demonstrates stable adhesion strength to liner plates, existing concrete, and more.

"Filcon Pad" is a non-shrink mortar for pads that demonstrates stable strength development over a long period. It excels in moldability, allowing for the rapid placement of pads during machinery installation work and the installation of steel column foundation bases. Additionally, by mixing within a specified water range, it maintains stable non-shrink properties. 【Features】 ■ Demonstrates stable adhesion strength to liner plates, existing concrete, etc. ■ Excels in moldability, enabling the rapid placement of pads during machinery installation work and the installation of steel column foundation bases. ■ Shows stable strength development over a long period. *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.png
  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-strength non-shrink mortar "Filcon H" for rapid curing.

High-strength non-shrink mortar "Filcon H" for rapid curing.

Long-term strength is also stably exhibited! Suitable for emergency construction under time constraints or while traffic is open.

"Filcon H" is a super-fast hardening, high-strength, non-shrink grout material that exceeds 40 N/mm² within 2 to 6 hours after placement. It is suitable for emergency construction under time constraints or while maintaining traffic flow. Additionally, it exhibits stable long-term strength. With excellent fluidity, it can fill complex shapes and voids, such as those in chipped concrete, thoroughly. 【Features】 - Maintains stable non-shrink properties through mixing within the specified water range, facilitating load transfer between structures. - There is no occurrence of bleeding, so there is no concern about leaving voids after filling. - A type with special short fibers is also available. *For more details, please refer to the PDF document or feel free to contact us.

  • image_02.png
  • image_03.png
  • image_04.png
  • image_05.png
  • image_06.png
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Non-shrink mortar

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.